# Can organelle be bypassed?

**URL:** <https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418>\
**Category:** Organelle\
**Created:** [July 11, 2017, 6:33am UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418 "2017-07-11T06:33:47Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![mysteryroach](https://avatars.discourse-cdn.com/v4/letter/m/67e7ee/32.png) [@mysteryroach](https://forum.critterandguitari.com/u/mysteryroach)\
**Post date:** [July 11, 2017, 6:33am UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/1 "2017-07-11T06:33:47Z")

</div>

I’m planning to use an Organelle with a table-top/pedalboard rig as both an effect and an instrument. I was wondering: can the Organelle be bypassed via midi such that its signal doesn’t go through the AD converter? I.e. does it have analog dry-through? Or does any signal that goes through it get digitized, and need to be cut out of the chain in a true bypass loop in order to preserve an analog dry signal.

Ultimately I just wanna know if I need to dedicate one of my precious loops to it, or if I can bypass it with midi and still stay analog when i’m not using the Organelle. I’d rather the latter if possible.

---

<div class="post-metadata">

**Author:** ![wo3](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/wo3/32/622_2.png) [@wo3](https://forum.critterandguitari.com/u/wo3)\
**Post date:** [July 11, 2017, 1:34pm UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/2 "2017-07-11T13:34:24Z")

</div>

There is no bypass for the Organelle. If you want a true analog bypass you will need a switch in parallel with the input of the Organelle. You can also have FX patches with bypasses, but the input is always going through the ADC and out the DAC as far as I know.

---

<div class="post-metadata">

**Author:** ![chrisk](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/chrisk/32/11_2.png) [@chrisk](https://forum.critterandguitari.com/u/chrisk)\
**Post date:** [July 11, 2017, 1:50pm UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/3 "2017-07-11T13:50:10Z")

</div>

Yes, @wo3 is correct: the Organelle does not have an analog bypass.

---

<div class="post-metadata">

**Author:** ![thetechnobear](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/thetechnobear/32/42_2.png) [@thetechnobear](https://forum.critterandguitari.com/u/thetechnobear)\
**Post date:** [July 11, 2017, 8:00pm UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/4 "2017-07-11T20:00:01Z")

</div>

@chrisk which codec are you using?

from the organelle logs it looks like the sgtl5000 - correct?  
looking at the sgtl5000 datasheet, whilst the lineouts can only be taken from the DAC (so no bypass) the headphone output can be taken from line in directly. p15 specifies this is done using CHIP\_ANA\_CTRL-\>SELECT\_HP.

of course, not saying its a good idea for driving outputs (from headphones) but could be useful for cueing type functionality.

---

<div class="post-metadata">

**Author:** ![thetechnobear](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/thetechnobear/32/42_2.png) [@thetechnobear](https://forum.critterandguitari.com/u/thetechnobear)\
**Post date:** [July 12, 2017, 5:38pm UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/5 "2017-07-12T17:38:40Z")

</div>

ok, so double checked its a sgtl5000 , which is on board the solid run hummingbird board used by organelle.

if you use the alsamixer , then you can switch the headphone output, between DAC or LINE\_IN. (Im assuming the audio input jack is connected to LINE\_IN rather than MIC\_IN)

---

<div class="post-metadata">

**Author:** ![oweno](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/oweno/32/10_2.png) [@oweno](https://forum.critterandguitari.com/u/oweno)\
**Post date:** [July 13, 2017, 2:30pm UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/6 "2017-07-13T14:30:33Z")

</div>

audio input is LINE\_IN that is correct, and alsamixer or amixer can be used for routing, but I don’t think there is any easy way to do from Pd (would need a custom object or to send amixer commands using the shell object)

---

<div class="post-metadata">

**Author:** ![mysteryroach](https://avatars.discourse-cdn.com/v4/letter/m/67e7ee/32.png) [@mysteryroach](https://forum.critterandguitari.com/u/mysteryroach)\
**Post date:** [July 13, 2017, 3:48pm UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/7 "2017-07-13T15:48:45Z")

</div>

Thanks for your help!

---

<div class="post-metadata">

**Author:** ![Tolsi](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/tolsi/32/4349_2.png) [@Tolsi](https://forum.critterandguitari.com/u/Tolsi)\
**Post date:** [May 4, 2020, 8:11pm UTC](https://forum.critterandguitari.com/t/can-organelle-be-bypassed/1418/8 "2020-05-04T20:11:07Z")

</div>

I made a small patch to do this right on the device:

> **[Headphone Mux | Patchstorage](https://patchstorage.com/headphone-mux/)**
>
> It allows you to switch Headphone Mux using amuxer between DAC and Line In. In DAC mode (default value), the sound from Organelle (such as…
