# Midi Clock right bpm, wrong time

**URL:** <https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802>\
**Category:** Organelle\
**Created:** [April 6, 2020, 8:22am UTC](https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802 "2020-04-06T08:22:43Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![Powaa](https://avatars.discourse-cdn.com/v4/letter/p/b5a626/32.png) [@Powaa](https://forum.critterandguitari.com/u/Powaa)\
**Post date:** [April 6, 2020, 8:22am UTC](https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802/1 "2020-04-06T08:22:43Z")

</div>

Hi,

I have my organelle syncing through midi out to my Volca FM and Volca Sample  
however using any sequencer patch within orac or outside is always off (unless I’m using Seq1)  
Using metronomes I have determined that there usually is a delay between the organelle’s click and the volca’s click (the volcas perfectly sync bpm and timing).

Changing BPM makes everything speed up respectively but the organelle’s beat is in the wrong spot (between system reboots I noticed that the organelle’s positioning changes however while it is running its wrong position remains consistent)

is this meant to be the case?

---

<div class="post-metadata">

**Author:** ![Fuzzy\_spacebear](https://avatars.discourse-cdn.com/v4/letter/f/e9a140/32.png) [@Fuzzy\_spacebear](https://forum.critterandguitari.com/u/Fuzzy_spacebear)\
**Post date:** [April 6, 2020, 8:50am UTC](https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802/2 "2020-04-06T08:50:18Z")

</div>

I’m curious which clock you are using in Orac when syncing with volca sample and FM.  
Have you downoaded and installed this patch for Orac?

> [@Improved sequencer modules for Orac](https://forum.critterandguitari.com/t/improved-sequencer-modules-for-orac/4972):
>
> Here are some improved sequencer modules for Orac on the Organelle: [https://patchstorage.com/sequencers-bpm/](https://patchstorage.com/sequencers-bpm/) Make sure you have [Orac](https://patchstorage.com/orac-2-0-for-organelle/) installed first. The .zop package creates a new folder of modules and also installs 3 presets for demo. The package includes: clock Updated LINK and MIDI enabled clock module that outputs 360 numbered ticks per beat…All the sequencers require this 360 tick beat clock to operate (more about this later), so this clock module must replace the standard Orac clock…

Using this as the clock master helped me a lot with syncing.

---

<div class="post-metadata">

**Author:** ![Powaa](https://avatars.discourse-cdn.com/v4/letter/p/b5a626/32.png) [@Powaa](https://forum.critterandguitari.com/u/Powaa)\
**Post date:** [April 6, 2020, 9:09am UTC](https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802/3 "2020-04-06T09:09:51Z")

</div>

yeah I am using that clock module, I also tried transport in fixing this and it has the same issue, also should mention that outside of orac I used the metronome utility and it has the same issue so I don’t think its orac specific

---

<div class="post-metadata">

**Author:** ![Fuzzy\_spacebear](https://avatars.discourse-cdn.com/v4/letter/f/e9a140/32.png) [@Fuzzy\_spacebear](https://forum.critterandguitari.com/u/Fuzzy_spacebear)\
**Post date:** [April 6, 2020, 10:36am UTC](https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802/4 "2020-04-06T10:36:27Z")

</div>

The only thing that I can think of (you may have as well) is for the FM and Sampler you can do a deep dive to tweak their clock setting if i remember well enough. Maybe theres something happening between fm and samplers midi with organelle. Are they both recieving simultaneous flashes

---

<div class="post-metadata">

**Author:** ![Fuzzy\_spacebear](https://avatars.discourse-cdn.com/v4/letter/f/e9a140/32.png) [@Fuzzy\_spacebear](https://forum.critterandguitari.com/u/Fuzzy_spacebear)\
**Post date:** [April 6, 2020, 10:37am UTC](https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802/5 "2020-04-06T10:37:38Z")

</div>

> **[0ee40bc9fbbb72aa51d519df2af5697d.pdf](https://cdn.korg.com/us/support/download/files/0ee40bc9fbbb72aa51d519df2af5697d.pdf?response-content-disposition=inline%3Bfilename*=UTF-8%27%27volcafm_MIDI_Chart_E1_01.pdf&response-content-type=application%2Fpdf%3B)**
>
> 667.65 KB

---

<div class="post-metadata">

**Author:** ![Powaa](https://avatars.discourse-cdn.com/v4/letter/p/b5a626/32.png) [@Powaa](https://forum.critterandguitari.com/u/Powaa)\
**Post date:** [April 6, 2020, 11:06am UTC](https://forum.critterandguitari.com/t/midi-clock-right-bpm-wrong-time/5802/6 "2020-04-06T11:06:19Z")

</div>

Ohhhh so through some testing it appears that the devices don’t care where the beat is, only that the bpm matches (which is kind of annoying) so I have to sync up the play button on the volcas to actually get it in sync. unfortunately there is no clock reset function as far as I can see on the organelle.
