# OS card crashed

**URL:** <https://forum.critterandguitari.com/t/os-card-crashed/3474>\
**Category:** Organelle\
**Created:** [November 6, 2018, 6:26pm UTC](https://forum.critterandguitari.com/t/os-card-crashed/3474 "2018-11-06T18:26:52Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![chrisk](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/chrisk/32/11_2.png) [@chrisk](https://forum.critterandguitari.com/u/chrisk)\
**Post date:** [November 6, 2018, 9:52pm UTC](https://forum.critterandguitari.com/t/os-card-crashed/3474/2 "2018-11-06T21:52:57Z")

</div>

Instructions to reflash the micro SD:

> [@SD card disk image with patch storage](https://forum.critterandguitari.com/t/sd-card-disk-image-with-patch-storage/2838/1):
>
> You can grab the disk image here:
> 
> [http://thepeacetreaty.org/organelle/diskimages/](http://thepeacetreaty.org/organelle/diskimages/)
> 
> and download the file:
> 
> 20180529-v3.1.img.zip
> 
> Flash the image to an SD card using Etcher:
> 
> - Download [Etcher](https://etcher.io/) and install it.
> - Connect an SD card reader with the SD card inside.
> - Open Etcher and select from your hard drive the .zip file you wish to write to the SD card.
> - Select the SD card you wish to write your image to.
> - Review your selections and click ‘Flash!’ to begin writing data to the SD card.
> 
> The above instructions were copied from the [Raspberry Pi site](https://www.raspberrypi.org/documentation/installation/installing-images/README.md). The Organelle is not Raspberry Pi, but the process of burning SD card disk images is the same, so you can read more about the process there if interested.

---

_[View the full topic](https://forum.critterandguitari.com/t/os-card-crashed/3474)._