# Unscrewing the Organelle M

**URL:** <https://forum.critterandguitari.com/t/unscrewing-the-organelle-m/9078>\
**Category:** Organelle\
**Created:** [December 28, 2022, 2:11pm UTC](https://forum.critterandguitari.com/t/unscrewing-the-organelle-m/9078 "2022-12-28T14:11:46Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![veloopity](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/veloopity/32/5208_2.png) [@veloopity](https://forum.critterandguitari.com/u/veloopity)\
**Post date:** [December 28, 2022, 2:11pm UTC](https://forum.critterandguitari.com/t/unscrewing-the-organelle-m/9078/1 "2022-12-28T14:11:46Z")

</div>

is there a video similar to this

[![](https://img.youtube.com/vi/7b37cQDswms/maxresdefault.jpg "Step-by-Step Organelle Keypad Replacement Demonstration") ](https://www.youtube.com/watch?v=7b37cQDswms)

showing how to successfully take apart an Organelle M, and putting it together again?  
I managed to pour a little water over it - not much and I don’t know if anything got inside - it still works - but I’d feel safer if I could take it apart just a bit so that I can use an electric fan to dry the electronics . I tried it but gave up when I realized I’d have to unscrew the 4 screws that hold the speaker. I unscrewed one of them and don’t get it in again 🙂  
So for now, I blew some warm air at it from the outside, hoping it helped a little. If it still works, can I feel safe or is it possible that a little water got inside and will oxidize something later so that it won’t work a week from now?

---

<div class="post-metadata">

**Author:** ![chrisk](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/chrisk/32/11_2.png) [@chrisk](https://forum.critterandguitari.com/u/chrisk)\
**Post date:** [December 28, 2022, 5:00pm UTC](https://forum.critterandguitari.com/t/unscrewing-the-organelle-m/9078/2 "2022-12-28T17:00:24Z")

</div>

Hi,

Sorry to hear about that water spill!

We don’t have a video guide, but here’s a PDF:

> **[Organelle\_M\_Assembly.pdf](https://cdn.shopify.com/s/files/1/0159/3944/files/Organelle_M_Assembly.pdf)**
>
> 3.99 MB

---

<div class="post-metadata">

**Author:** ![veloopity](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/veloopity/32/5208_2.png) [@veloopity](https://forum.critterandguitari.com/u/veloopity)\
**Post date:** [December 29, 2022, 9:38am UTC](https://forum.critterandguitari.com/t/unscrewing-the-organelle-m/9078/3 "2022-12-29T09:38:35Z")

</div>

that’s very helpful, many thanks !!

---

<div class="post-metadata">

**Author:** ![element-s](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/element-s/32/1761_2.png) [@element-s](https://forum.critterandguitari.com/u/element-s)\
**Post date:** [January 1, 2023, 7:25pm UTC](https://forum.critterandguitari.com/t/unscrewing-the-organelle-m/9078/4 "2023-01-01T19:25:41Z")

</div>

Leave it open in a warmish ventilated room and the water will evaporate by itself after a few days. Then close it again. All the electronics will be fine.