# USB to USB midi interface

**URL:** <https://forum.critterandguitari.com/t/usb-to-usb-midi-interface/1873>\
**Category:** Organelle\
**Created:** [October 22, 2017, 1:42pm UTC](https://forum.critterandguitari.com/t/usb-to-usb-midi-interface/1873 "2017-10-22T13:42:20Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![KristofferLislegaard](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/kristofferlislegaard/32/306_2.png) [@KristofferLislegaard](https://forum.critterandguitari.com/u/KristofferLislegaard)\
**Post date:** [October 22, 2017, 1:42pm UTC](https://forum.critterandguitari.com/t/usb-to-usb-midi-interface/1873/1 "2017-10-22T13:42:20Z")

</div>

Is there a small USB to USB midi interface? Would be a great way to use the organelle as a midi controller and also to send midi from a daw into patches on the organelle.

I guess I could solder together two din to USB interfaces but if there is a small cable like interface allready that would be great!

---

<div class="post-metadata">

**Author:** ![thetechnobear](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/thetechnobear/32/42_2.png) [@thetechnobear](https://forum.critterandguitari.com/u/thetechnobear)\
**Post date:** [October 22, 2017, 5:20pm UTC](https://forum.critterandguitari.com/t/usb-to-usb-midi-interface/1873/2 "2017-10-22T17:20:09Z")

</div>

Ive wondered myself about this a few times…

its a bit tricky, because what you need is a ‘thing’ which acts as a usb device to 2 hosts.  
I think the iConnect midi range does this (iConnectMidi2)

you could also build something cheap and small using something like two arduino unos (6 euro each), and then connect them together via uart… they’d be bus powered, and you’d then just use two normal usb cables to connect to the computer and organelle. probably be quite a neat solution.

---

<div class="post-metadata">

**Author:** ![KristofferLislegaard](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/kristofferlislegaard/32/306_2.png) [@KristofferLislegaard](https://forum.critterandguitari.com/u/KristofferLislegaard)\
**Post date:** [October 22, 2017, 6:23pm UTC](https://forum.critterandguitari.com/t/usb-to-usb-midi-interface/1873/3 "2017-10-22T18:23:23Z")

</div>

Yeah. I’ve been thinking about just solidering two of these together

 ![](https://canada1.discourse-cdn.com/flex035/uploads/critterandguitari/original/1X/7d2664ff8a052df76897fcd8f5d92d14958ebc7d.jpg)

---

<div class="post-metadata">

**Author:** ![thetechnobear](https://yyz1.discourse-cdn.com/flex035/user_avatar/forum.critterandguitari.com/thetechnobear/32/42_2.png) [@thetechnobear](https://forum.critterandguitari.com/u/thetechnobear)\
**Post date:** [October 22, 2017, 6:39pm UTC](https://forum.critterandguitari.com/t/usb-to-usb-midi-interface/1873/4 "2017-10-22T18:39:58Z")

</div>

> [@KristofferLislegaard](#):
>
> I’ve been thinking about just solidering two of these together

or just get a couple of midi couplers… then you can still use as midi din converters if required.