Audio signal flow - Orac 2 (Problem)

[duellingants]

Hi

There was a topic on this not long ago. The solution is described here:

Orac 2.0 incoming audio

You have to go to the Parallel module (C#1 + encoder), then go to the Gain Chain you want to use by pressing F#2 for Gain Chain 1, A2 for Gain Chain 2 or roll the enconder to the right for Gain Chain 3 while you are still on Parallel and there you have to turn up the in gain from L and R [WhatsApp Image 2019-12-19 at 16.23.29]