Midi problem with Korg Monologue

Hello, I have a small problem with my pocket piano 201. It is synchronized in midi to a korg monologue. When I start with a loop in hold mode on the pocket piano, it stops when I launch the monologue sequencer. I tried different configurations in the midi settings of both but I can’t find a solution… thank you for your help

put the 201 in slave mode, to follow the clock from an external device,

https://www.youtube.com/watch?v=G4tocCKlst4

Thank you.
Problem solved by entering the disk mode of the Pocket Piano and changing the input Channel to 0 which configures in Omni.

Everything worked by having passed Input and output channel on 0. But without having touched anything, it is no longer the case. I do not understand.
(And even, it desynchronizes the Volca beat which is in the chain)
Does anyone have an idea.
(My chain is the following: KorgMonologue output midi / input midi Microkorg thru / input midi Pocket Piano output midi / input midi Volca Beats)

I think the Pocket Piano might be responding to the MIDI start message from the monologue. This causes it to release the hold and attempt to play a sequence. This can be disabled with:

transport-in-enable 0;

In the midi.txt file

Thanks for your reply
I made the following changes, input-channel0 / output-channel0 and transport-in0 and it still doesn’t work.

@D.Aguirre - after you make changes to the midi.txt file you need to save the file and then reload the mother patch by holding the high E + F + G keys and then press Shift.

I forgot the reload, you’re right
It works.
Thank you very much for your help !

1 Like