With the cable connected to both devices, please scroll the Organelle screen to “Info” and click (it is near the top). On the “MIDI” line, do you see something (like brand name) that indicates the Organelle recognizes the cable is there?
Is there an LED that blinks on the USB-MIDI cable when you play a note on the MIDI keyboard?
The USB-MIDI cables often have poorly marked labels on the jacks…are you certain you connected the MIDI In cable to the MIDI jack?
Hi @keithjoyner. I read your offline email response. Unfortunately the VicTsing USB-MIDI cables are not reliable in our experience. We tried one with our computers and with few Organelles and could not get it to work.
hi owen i have a gibson echoplex by oberheim edp2. for some reason the usb to midi connection doesn’t work correctly? when i plug the organelle ‘out’ to the echoplex ‘in’ the EDP just kind of freaks out and doesn’t sync beat? anything you know i might be doing wrong?
I’ve had one USB-Midi (from aliexpress) that never worked. Looking into getting a new one as I am going to leave the BSP out of my setup and use Live as the main sequencer. Thus I need to use my soundcard’s Midi I/O running to a Kenton Thru and from there to the Organelle. Or any other suggestions on how to set up?
Does anyone know a device that could sync the Organelle, OP-1, and Octatrack? I’ve been looking at Kenton products, but they only have one usb port, and I’d like to control the Organelle and OP-1’s usb with the Octatrack’s midi…
That’s really over the top. The OP1 can connect directly to the Organelle via USB. The OT needs DIN MIDI as its USB is for sample in / out only which is why you need a USB MIDI interface for the Organelle but a basic one will do (I use M-Audio Uno).
I meant the OT midi out to the kenton box midi in, USB out of the kenton box for the op1, then the din midi out of the kenton box into the organelle with whatever usb to midi interface cable. Guess I was assuming the master would be the OT.
could you elaborate? any images? ‘wired’ is Kida open. I have a Kenton Thru 5 sending midi channels to synths etc, I bought the EMU midi 1x1 tab and when I connect it and send midi I get nothing. I have tried EVERYTHING and cannot see how to get midi from live into this damn thing! Any clarity, advice anybody?
so I assume you have
synth/controller w/din -> Kenton <- emu midi 1x1 -> organelle
I also assume you are running organelle OS 3.0 (or 3.1) on the organelle.
if not, install that now
ok, next in settings ->midi setup -> can you select the emu as a midi device? if so select it, also check that the midi in/out channels are as you want - and press save.
now start a c&g patch e.g. basic poly, then your synth/controller should be able to play organelle.
if not check the lights on the 1x1 to see if there is midi data being sent